PRODUCTS > MID-STATE TANKS
PRODUCTS > MID-STATE TANKS
PRODUCTS > MID-STATE TANKS
CALL US: 1-515-832-0350
PRODUCTS > ROME PLOW-AGRICULTURE > TANDEM DISC HARROWS > 265 SERIES

TANDEM DISC HARROW
265 SERIES
Disc Harrows 265 Series are good for use with tractors in the 268 – 377hp range.
Features
-
Uniquely designed harrow is available in three wing fold models. Harrows are ideally suited to give excellent uniform tillage results in all plowing applications.
-
Mainframe, wings, and gang carriers constructed of tough high strength tubular steel for maximum strength and durability.
-
Hydraulically controlled transport assembly with cylinder transport locks to the pin-wheels in raised position to safeguard implement from accidentally falling during transport.
-
9” (229mm) ground clearance with standard 28” (711mm) diameter disk blades.
-
Fixed gang angles of 20° for both front and rear gangs.
-
Tapered gang assemblies.
-
Hydraulic down pressure kit to keep wings rigid.
-
Up to 9” (229mm) maximum depth of penetration with standard 28” (711mm) diameter disk blades.
-
Equipped with Timken dual tapered oil bath roller bearings.
-
Standard bearing wear plates help protect the bearing housing from the wear caused by abrasive soils, extending their service life and decreasing cost.
Specifications
11” (279mm) disk spacing; 1-5/8” (41mm) round axles; Equipped with Timken dual tapered oil bath roller bearings.

Standard Equipment
-
28” (711mm) diameter x 5/16” (8mm) thick, cutout (notched) shallow concavity disk blades.
-
Oil bath lubricated disk type balk buster.
-
Tapered gang assemblies.
-
Heat-treated alloy steel gang axles.
-
Heavy-duty fabricated steel spacers.
-
Adjustable disk blade scrapers.
-
Heavy-duty bearing wear plates.
-
Eight 12L x 15 farm highway service tires for transporting, plowing, and turning.
-
Wheel hubs with two tapered roller bearings on each hub that are dust and moisture protected.
-
The hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach the rear of the tractor.
-
Rod stops for depth control adjustment.
-
Hardened pins and bushings on all pivot points.
-
Drawbar jack stand and safety chain.
Optional Equipment
-
28” (711mm) diameter x 5/16” (8mm) thick, cutout (notched) front and smooth (round) rear shallow concavity disk blades.
-
Rear hitch assembly.
-
28” (711mm) diameter x 5/16” (8mm) thick, round (smooth) front and rear shallow concavity disk blades.
-
Rear hydraulic group.
-
28” (711mm) diameter x 5/16” (8mm) dura-faced disk blades available in all configurations.
-
Extra heavy-duty bearing wear plates with 1/4” (6mm) hard plate overlay.
-
Light group.
