top of page

Disc Harrows ACH Series are good for use with tractors in the 212 – 390hp range. 

  • The patented Hinge Wheel Offset Disk Harrow line was designed by ROME engineers. The goal was to meet today’s high residue needs. Ruggedly built it is ideally suited for plowing, light plowing, pulverizing, and plowing stubble.

  • The unique concept combines the superior uniform leveling and mixing capability of a hinge harrow with the convenient transportability of a wheel harrow.

  • Gang assembly design positions the bearing and spacer assemblies behind the gang carriers providing additional clearance resulting in excellent trash handling capabilities.

  • The full range of adjustments allows the precise control of penetration depth hydraulically.

  • “On the go” angle adjustments from 0° to 45° are hydraulically controlled from the operator’s seat.

  • Equipped with Timken dual tapered roller bearings with cast housings.

  • Standard heavy-duty bearing wear plates help protect the bearing housing from wear caused by abrasive soils, extending their service life and reducing cost.

  • Wide 17-3/4” (451mm) disk spacing encourages less clogging; provides superior soil and residue control; reduced drawbar pull, and maximizes penetration.


17-3/4” (451mm) disk spacing; 2-1/8” (54mm) round axles; Equipped with Timken dual tapered roller bearings.

Standard Equipment
  • 32” (813mm) diameter x 3/8” (10mm) thick, cutout (notched) shallow concavity disk blades.

  • Adjustable disk blade scrapers.

  • Extra heavy-duty bearing wear plates with hard plate overlay.

  • New industrial tires -12.5L x 16 – 12 plies.

  • Drawbar jack stand and safety chain.

  • The hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach the rear of the tractor.

Optional Equipment
  • Rear hitch assembly.

  • Rear hydraulic group.

  • Light group.

  • 32” (813mm) diameter x 3/8” (10mm) thick; cutout (notched) shallow concavity dura-faced disk blades (Model B1).

  • 34” (864mm) diameter x 3/8” (10mm) thick; cutout (notched) shallow concavity dura-faced disk blades. (Model B2).

bottom of page