BH-EP Series | The Gator Center
top of page
HINGE WHEEL OFFSET DISC HARROW
BH-EP SERIES

Disc Harrows BH-EP Series are good for use with tractors in the 254 – 351hp range.

Features

  • Completely new, patented hinge wheel offset harrow line concept. Built rugged and designed for long, trouble-free operation.

  • Combines the superior uniform leveling and mixing capability of hinge harrows with the transportability of wheel harrows.

  • End pull transport capability allows the operator to go from plowing in the field to road transportation; in a few minutes with minimum effort.

  • The full range of adjustments allows the precise control of penetration depth hydraulically.

  • “On the go” angle adjustments from 0° to 45° are hydraulical; and you can control them from the operator’s seat.

  • New gang assembly design positions the bearing and spacer assemblies behind the gang carriers; it helps to provide additional clearance to minimize clogging.

  • Reinforced scrapers clean disk blades more efficiently.

  • Also available with Timken oil bath tapered roller bearings.

Specifications

11” (279mm) disk spacing; 1-5/8” (41mm) round axles; Equipped with Timken dual tapered roller bearings.

Capture-18.png.webp
Standard Equipment

  • 28” (711mm) diameter x 5/16” (8mm) thick; cutout (notched) deep concavity disk blades.

  • Adjustable disk blade scrapers.

  • The end-pull transport assembly includes 11L x 15 highway service tires; and the hydraulic angle control group.

  • Heavy-duty bearing wear plates.

  • Drawbar jack stand and safety chain.

  • Furrow filler blade.

  • Hydraulic quick coupler.

Optional Equipment

  • Extra heavy-duty bearing wear plates.

  • Light group.

  • 28” (711mm) diameter x 5/16” (8mm) thick; dura- faced cutout (notched) deep concavity disk blades.

  • Forrow filler

ROME-JOHN-DEERE-2015-6.jpg.webp
ROME-JOHN-DEERE-2015-2.jpg.webp
bottom of page