top of page

Disc Harrow CH Series is good for use with tractors in the 152 – 295hp range.

  • The patented Hinge Wheel Offset Disk Harrow line was designed by ROME engineers to meet today’s high residue needs. Ruggedly built it is ideally suited for plowing, light plowing,

  • pulverizing, and plowing stubble.

  • The unique concept combines the superior uniform leveling and mixing capability of a hinge harrow with the convenient transportability of a wheel harrow.

  • Gang assembly design positions the bearing and spacer assemblies behind the gang carriers providing additional clearance resulting in excellent trash handling capabilities.

  • The full range of adjustments allows the precise control of penetration depth hydraulically.

  • “On the go” angle adjustments from 0° to 45° are hydraulically controlled from the operator’s seat.

  • Equipped with Timken dual tapered roller bearings with cast housings.

  • Standard heavy-duty bearing wear plates help protect the bearing housing from wear caused by abrasive soils, extending their service life and reducing cost.


9-1/2” (241mm) disk spacing; 1-5/8” (41mm) round axles; Equipped with Timken dual tapered roller bearings.

Standard Equipment
  • 26” (660mm) diameter x 1/4” (6mm) thick, cutout (notched) deep concavity disk blades.

  • Adjustable disk blade scrapers.

  • Heavy-duty bearing wear plates.

  • Transport assembly includes a hydraulic angle control group with 12.5L x 16 tires, wheels, and hubs. CH-320 & CH-400: 8 ply tires. CH-480 – CH-640: 12 ply tires.

  • Drawbar jack stand and safety chain.

Optional Equipment
  • Rear hitch assembly.

  • Rear hydraulic group.

  • Extra heavy-duty wear plates.

  • Light group.

  • Furrow filler blade group.

bottom of page