top of page
EJECTOR SCRAPER
RP-180 HDE SERIES

Ejector Scraper RP-180HDE Series is good for the use with tractors in the 360 – 600hp range

Features
  • Rugged 18 yd³ (13.8m³) scraper with heavy-duty plate frame construction for maximum strength and rigidity.

  • A cost-effective way to move material when haul distance is 1000’ (305m) or less.

  • Rear cross member made from 10” (254mm) x 10” (254mm) x 3/4” (20mm) thick fabricated box section steel.

  • Spreader bar made from 14” (357mm) x 14” (357mm) x 3/4” (20mm) thick fabricated box section steel.

  • Tandem hitch capability.

  • “Slip-in” bolted spindle and hub assembly.

  • Highest quality hydraulic cylinders have ball joints on both base and rod ends for long life.

  • Push block protects the scraper rear when push loading is necessary for tough loading conditions.

  • Three-piece cutting edge with extended center router blade has the same cutting edge and router bit as Rome R67H scraper.

  • Bottom rollers on ejector assembly with ejector top rollers and guide rails on bowl sides to support ejector.

Capture-3.png.webp
Capture2.png.webp
RP180HDEScraper2.jpg.webp
RP-180HDE_heavy_duty_ejector_scraper.jpg.webp
bottom of page