TCW Series | The Gator Center

Disc Harrows TCW Series are good for use with tractors in the 30 – 114hp range.

Heavy-duty proven design with rugged boxed angle construction welded for maximum strength and rigidity.
High gang carrier design to prevent trash build-up and clogging.
Levels, cuts, and mixes to full working depth.
Combines the ease of maneuverability with high strength for the most adverse conditions.
Up to 178lbs (81kg) of weight per disk blade depending on the model with an average of 171lbs (78kg).
Up to 8” (203mm) maximum depth of penetration with standard 24” (610mm) diameter disk blades.
Equipped with Timken dual tapered roller bearings.
Adjustable disk blade scrapers.
Dual purpose transport unit for transportability and penetration control.

9-1/2” (241mm) disk spacing; 1-5/8” (41mm) round axles; Equipped with Timken dual tapered roller bearings.

24” (610mm) diameter x 1/4” (6mm) thick, cutout (notched) deep concavity disk blades.
Adjustable disk blade scrapers.
Heat-treated alloy steel gang axles.
Heavy-duty cast steel spacer spools.
Heavy-duty bearing wear plates.
New industrial tires – 2 each. TCW-16 thru TCW-24: 12.5L x 15 – 12 plies. TCW-28 and TCW-32: 7.5 x 16 – 12 ply. TCW-36 and TCW-40: 12.5L x 15 – 12 ply.
The hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach the rear of the tractor.
Two heavy-duty gang wrenches.
Drawbar jack stand and safety chain.

26” (660mm) diameter x 1/4” (6mm) thick, cutout (notched) deep concavity disk blades.
Cylinder rod stops for positive depth control adjustment.
Drawbar clevis for track-type tractors.

CALL US: 1-515-832-0350