top of page
WHEEL OFFSET DISC HARROW
TRCW-12 & TRCW-16 SERIES

Disc Harrows TRCW Series are good for use with tractors in the 240 – 400hp range. 

Features
  • For deep plowing, plowing in the heavy trash, mixing and aerating.

  • Heavy-duty proven design with rugged boxed angle construction welded for maximum strength and rigidity.

  • Adjustable disk blade scrapers.

  • Equipped with Timken dual tapered roller bearings.

  • High gang carrier design to prevent trash build-up and clogging.

  • Up to 1092lbs (497kg) of weight per disk blade depending on the model.

  • Standard 13” (330mm) depth of penetration with 36” (914mm) diameter disk blades.

  • Optional 15” (381mm) depth of penetration with 42” (1.07m) diameter disk blades.

Specifications

20” (508mm) disk spacing; 2-1/2” (64mm) round axles; Equipped with Timken dual tapered roller bearings.

Capture-7.png.webp
TRCW1216Series1.jpg.webp
TRCW1216Series2.jpg.webp
WHEEL OFFSET DISK HARROW
TRCW-20 & TRCW-24 SERIES

Disc Harrow TRCW Series is good for use with tractors in the 375 – 600hp range.

Features
  • For deep plowing, plowing in the heavy trash, mixing, and aerating.

  • Heavy-duty proven design with rugged boxed angle construction welded for maximum strength and rigidity.

  • Adjustable disk blade scrapers.

  • Equipped with Timken dual tapered roller bearings.

  • High gang carrier design to prevent trash build-up and clogging.

  • Heavy-duty torsion tube for distributing the torque generated by the front right gang.

  • Hydraulic tongue leveler with nitrogen accumulator.

  • Up to 1088lbs (494kg) of weight per disk blade depending on the model.

  • Standard 13” (330mm) depth of penetration with 36” (914mm) diameter disk blades.

  • Optional 15” (381mm) depth of penetration with 42” (1.07m) diameter disk blades.

Specifications

20” (508mm) disk spacing; 2-1/2” (64mm) round axles; Equipped with Timken dual tapered roller bearings.

TRCW-20-24-series.jpg.webp
Standard Equipment
  • 36” (914mm) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades.

  • Hydraulic tongue leveler with nitrogen accumulator.

  • Adjustable disk blade scrapers.

  • Heat-treated alloy steel gang axles.

  • Heavy-duty fabricated steel spacer spools.

  • Heavy-duty bearing wear plates.

  • New industrial tires – 4 each TRCW-20 and TRCW-24: 21.5 x 16.1 – 14 ply.

  • The hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach the rear of the tractor.

  • Drawbar jack stand and safety chain.

Optional Equipment
  • 42” (1.07m) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades.

  • Cylinder rod stops.

  • Light group.

  • Oil Bath Bearings

bottom of page