top of page


Series RP-180HDE Heavy Duty Ejector Scraper - for use with tractors in the 360 – 600 hp range.


  • Rugged 18 yd³ (13.8m³) scraper with heavy-duty plate frame construction for maximum strength and rigidity.

  • A cost-effective way to move material when the haul distance is 1000’ (305m) or less.

  • The rear cross member is made from 10” (254mm) x 10” (254mm) x 3/4” (20mm) thick fabricated box section steel.

  • The spreader bar is made from 14” (357mm) x 14” (357mm) x 3/4” (20mm) thick fabricated box section steel.

  • Tandem hitch capability.

  • “Slip-in” bolted spindle and hub assembly.

  • The highest quality hydraulic cylinders have ball joints on both base and rod ends for long life.

  • Push block protects the scraper rear when push loading is necessary for tough loading conditions.

  • The three-piece cutting edge with an extended center router blade has the same cutting edge and router bit as the Rome R67H scraper.

  • The bottom rollers on the ejector assembly are with the ejector top rollers and guide rails on the bowl sides to support the ejector.


*Engine horsepower is suggested ranges and varies according to soil conditions and weight added to the scraper.
NOTE: This scraper requires hydraulic control. One rear tractor hydraulic circuit required for scraper operation. Additional hydraulic circuits required for tilt option and each attachment.

Standart Equipment

Optional Equipment



bottom of page