top of page


Series RP-212HDE Heavy Duty Ejector Scraper - for use with tractors in the 375 – 600 hp range.


  • Rugged 23 yd³ (17.6m³) scraper with heavy-duty plate frame construction for maximum strength and rigidity.

  • The rear cross member is made from 10” (254mm) x 10” (254mm) x 3/4” (20mm) thick fabricated box section steel.

  • The spreader bar is made from 14” (357mm) x 14” (357mm) x 3/4” (20mm) thick fabricated box section steel.

  • 3-1/2” (89mm) thick floor protects against pan deflection from heavy material loads and floor wear from abrasion.

  • Tandem hitch capability.

  • “Slip-in” bolted spindle and hub assembly.

  • The highest quality hydraulic cylinders have ball joints on both base and rod ends for long life.

  • Push block protects the scraper rear when push loading is necessary for tough loading conditions.

  • The main cutting edge has a multi-piece design, making it easy to change a single section of the blade.

  • The ejector is supported by six rollers that are built with wheel hub-style components for easy maintenance and maximum life.


*Engine horsepower is suggested ranges and varies according to soil conditions and weight added to the scraper.
NOTE: This scraper requires hydraulic control. One rear tractor hydraulic circuit required for scraper operation. Additional hydraulic circuits required for tilt option and each attachment.

Standart Equipment

Optional Equipment



bottom of page