top of page


Series RP-2812 HDE Heavy Duty Ejector Scraper - for use with tractors in the 450 - 650 hp range


  • Rugged 28 yd³ (21.4m³) scraper with heavy duty plate frame construction for maximum strength and rigidity.

  • 3-1/2” (89mm) thick floor protects against pan deflection from heavy material loads and floor wear from abrasion.

  • Tandem hitch capability.

  • Highest quality hydraulic cylinders have ball joints on both base and rod ends for long life.

  • Push block protects scraper rear when push loading is necessary in tough loading conditions.

  • Main cutting edge is a multi-piece design making it easy to change a single section of the blade.

  • Ejector is supported with six rollers that are built with wheel hub style components for easy maintenance and maximum life.

  • Rear bumper sections un-bolt individually for easy wheel hub and tire maintenance.

  • Ejector trash rack pivots to three different positions for top loading, and for controlling material in different soil conditions.

  • 26.5 x 25 tires are standard equipment for high flotation.

  • Available in 2 or 3 function hydraulic control setup.


*Engine horsepower is suggested ranges and varies according to soil conditions and weight added to the scraper.
NOTE: This scraper requires hydraulic control. One rear tractor hydraulic circuit required for scraper operation. Additional hydraulic circuits required for tilt option and each attachment.

Standart Equipment

Optional Equipment



bottom of page