top of page


Series TACWR Wheel Offset Disk Harrow - for use with tractors in the 150 – 325 hp range.


  • For deep plowing, plowing in heavy trash, mixing, and aerating.

  • Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity.

  • Combines thorough mixing and aerating with easy maneuverability and transportability.

  • Fabricated spacers are made with A53 steel for high compression and tensile strength, which gives them approximately double the durability of cast spacers.

  • Heavy duty moldboard style adjustable disk blade scrapers.

  • Equipped with greaseable Timken dual tapered roller bearings.

  • High gang carrier design to prevent trash build-up and clogging.

  • Depending on the model, the disk blade can weigh up to 737 lbs (335kg), with an average of 681 lbs (309kg).

  • Full range of adjustments to control depth of penetration – up to 13” (330mm) with 36” (914mm) diameter disk blades.


*Engine horsepower is suggested ranges and varies according to soil conditions and weight added to the scraper.
NOTE: This scraper requires hydraulic control. One rear tractor hydraulic circuit required for scraper operation. Additional hydraulic circuits required for tilt option and each attachment.

Standart Equipment

Optional Equipment

  • 36” (914mm) diameter, 1/2” (13mm) thick, cutout deep concavity disk blades.

  • Fabricated spacers made from A53 steel.

  • Heavy duty moldboard style adjustable disk blade scrapers.

  • Heavy duty bearing wear plates.

  • New industrial tires – 2 each. TACWR-12 and TACWR-16: 12.5L x 15. TACWR-20: 16.5L x 16.1.

  • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach the rear of the tractor.

  • Drawbar jack stand and safety chain.

  • Cylinder rod stops for positive depth control adjustment.

bottom of page