top of page


Series TAW Wheel Offset Disk Harrow - for use with tractors in the 84 – 193 hp range.


  • Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity.

  • Dual-purpose transport unit for transportability and penetration control.

  • Combines ease of maneuverability with high strength for the most adverse conditions.

  • High gang carrier design to prevent trash build-up and clogging.

  • Greaseable dual tapered roller bearings.

  • Levels, cuts, and mixes to full working depth.

  • Depending on the model, the disk blade can weigh up to 384 lbs (174kg), with an average of 366 lbs (166kg).

  • Full range of adjustments to control depth of penetration – up to 9” (229mm) with standard 28” (711mm) diameter disk blades.


*Engine horsepower is suggested ranges and varies according to soil conditions and weight added to the scraper.
NOTE: This scraper requires hydraulic control. One rear tractor hydraulic circuit required for scraper operation. Additional hydraulic circuits required for tilt option and each attachment.

Standart Equipment

Optional Equipment

  • 28” (711mm) diameter, 3/8” (10mm) thick, cutout (notched) deep concavity disk blades.

  • Adjustable disk blade scrapers.

  • Heavy duty bearing wear plates.

  • New industrial tires – 2 each. TAW-16 thru TAW-24: 12.5L x 15. TAW-28 and TAW-32: 21.5L x 16.1.

  • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach the rear of the tractor.

  • Drawbar jack stand and safety chain.

  • 30” (762mm) diameter x 3/8” (10mm) thick, cutout (notched) deep concavity disk blades.

  • 30” (762mm) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades.

  • 32” (813mm) diameter x 3/8” (10mm) thick, cutout (notched) deep concavity disk blades.

  • Cylinder rod stops.

bottom of page