top of page


Series TBW Wheel Offset Disk Harrow


  • Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity.

  • High gang carrier design to prevent trash build-up and clogging.

  • Levels, cuts, and mixes to full working depth.

  • Combines ease of maneuverability with high strength for the most adverse conditions.

  • Depending on the model, up to 277 lbs (126kg) of weight per disk blade, with an average of 240 lbs (109kg).

  • Up to 9” (229mm) maximum depth of penetration with standard 26” (660mm) diameter disk blades.

  • Equipped with Timken dual tapered roller bearings.

  • Adjustable disk blade scrapers.

  • Dual-purpose transport unit for transportability and penetration control.


*Engine horsepower is suggested ranges and varies according to soil conditions and weight added to the scraper.
NOTE: This scraper requires hydraulic control. One rear tractor hydraulic circuit required for scraper operation. Additional hydraulic circuits required for tilt option and each attachment.

Standart Equipment

Optional Equipment

  • Adjustable disk blade scrapers.

  • 26” (610mm) diameter x 5/16” (8mm) thick; cutout (notched) deep concavity disk blades.

  • Heat-treated alloy steel gang axles.

  • Heavy-duty cast steel spacer spools.

  • Heavy duty bearing wear plates.

  • New industrial tires – 2 each. TBW-16: 7.5 x 16 – 6 ply. TBW-20 and TBW-24: 7.5 x 16 – 10ply. TBW-32: 12.5L x 15 – 12 ply. TBW-40:16.5L x 16.1 – 10 ply.

  • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach the rear of the tractor.

  • Two heavy-duty gang wrenches.

  • Drawbar jack stand and safety chain.

  • 28” (711mm) diameter x 5/16” (8mm) thick, cutout (notched) deep concavity disk blades.

  • Drawbar with track type clevis.

  • Cylinder rod stops for positive depth control adjustment.

bottom of page