top of page


Series TCW Wheel Offset Disk Harrow - for use with tractors in the 30 – 114 hp range.


  • Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity.

  • High gang carrier design to prevent trash build-up and clogging.

  • Levels, cuts, and mixes to full working depth.

  • Combines ease of maneuverability with high strength for the most adverse conditions.

  • Depending on the model, the disk blade can weigh up to 178 lbs (81kg), with an average of 171 lbs (78kg).

  • Up to 8” (203mm) maximum depth of penetration with standard 24” (610mm) diameter disk blades.

  • Equipped with Timken dual tapered roller bearings.

  • Adjustable disk blade scrapers.

  • Dual-purpose transport unit for transportability and penetration control.


*Engine horsepower is suggested ranges and varies according to soil conditions and weight added to the scraper.
NOTE: This scraper requires hydraulic control. One rear tractor hydraulic circuit required for scraper operation. Additional hydraulic circuits required for tilt option and each attachment.

Standart Equipment

Optional Equipment

  • 24” (610mm) diameter x 1/4” (6mm) thick, cutout (notched) deep concavity disk blades.

  • Adjustable disk blade scrapers.

  • Heat-treated alloy steel gang axles.

  • Heavy-duty cast steel spacer spools.

  • Heavy duty bearing wear plates.

  • New industrial tires – 2 each. TCW-16 thru TCW-24: 12.5L x 15 – 12 ply. TCW-28 and TCW-32: 7.5 x 16 – 12 ply. TCW-36 and TCW-40: 12.5L x 15 – 12 ply.

  • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach the rear of the tractor.

  • Two heavy-duty gang wrenches.

  • Drawbar jack stand and safety chain.

  • 26” (660mm) diameter x 1/4” (6mm) thick, cutout (notched) deep concavity disk blades.

  • Cylinder rod stops for positive depth control adjustment.

  • Drawbar clevis for track-type tractors.

bottom of page