top of page


Series TRCW Wheel Offset Disk Harrow - for use with tractors in the 240 – 400 hp range.


  • For deep plowing, plowing in heavy trash, mixing, and aerating.

  • Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity.

  • Adjustable disk blade scrapers.

  • Equipped with Timken dual tapered roller bearings.

  • High gang carrier design to prevent trash build-up and clogging.

  • Up to 1092 lbs (497kg) of weight per disk blade, depending on the model.

  • Standard 13” (330mm) depth of penetration with 36” (914mm) diameter disk blades.

  • Optional 15” (381mm) depth of penetration with 42” (1.07m) diameter disk blades.


*Engine horsepower is suggested ranges and varies according to soil conditions and weight added to the scraper.
NOTE: This scraper requires hydraulic control. One rear tractor hydraulic circuit required for scraper operation. Additional hydraulic circuits required for tilt option and each attachment.

Standart Equipment

Optional Equipment

  • 36” (914mm) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades.

  • Adjustable disk blade scrapers.

  • Heat-treated alloy steel gang axles.

  • Heavy-duty fabricated steel spacer spools.

  • Heavy duty bearing wear plates.

  • New industrial tires – 2 each TRCW-12 and TRCW-16: 15 x 22.5 – 16 ply.

  • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach the rear of the tractor.

  • Drawbar jack stand and safety chain.

  • 42” (1.07m) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades.

  • Cylinder rod stops.

  • Oil Bath Bearings.

bottom of page