EJECTOR SCRAPER
RP-18E 14.5 SERIES

Scraper RP-18E14.5 Series is good for use with tractors in the 360 – 600hp range.

Features
  • Designed for use in agriculture, road, and levee construction; besides, site preparation, pond building, cutting and maintaining irrigation ditches; and also land leveling.

  • Scraper features a moving ejector to push materials over a fixed blade.

  • Low tongue-weight ratio reduces drawbar weight and also lessens the weight on the tractors rear axle for improved service life.

  • Industry largest 3” (76mm) pins with replaceable bushings used throughout the implement provide improved durability in the roughest conditions.

  • Laser or GPS adaptable.

  • Optisurface compatible.

  • Available with a straight fixed blade for agricultural uses or with a staggered frostbit blade for construction type applications.

  • Heavy-duty router bits with two mounting positions. Once the bits wear just lower to the second mounting position to give the bits double the life expectancy.

Capture.png.webp
Capture-2.png.webp
18E14.5EScraper1.jpg.webp
18E14.5EScraper2.jpg.webp