TAW Series | The Gator Center
top of page
WHEEL OFFSET DISC HARROW
TAW SERIES

Disc Harrows TAW Series are good for use with tractors in the 84 – 193hp range.

Features

  • Heavy-duty proven design with rugged boxed angle construction welded for maximum strength and rigidity.

  • Dual purpose transport unit for transportability and penetration control.

  • Combines the ease of maneuverability with high strength for the most adverse conditions.

  • High gang carrier design to prevent trash build-up and clogging.

  • Greaseable dual tapered roller bearings.

  • Levels, cuts, and mixes to full working depth.

  • Up to 384lbs (174kg) of weight per disk blade depending on the model with an average of 366lbs (166kg).

  • Full range of adjustments to control the depth of penetration – up to 9” (229mm) with standard 28” (711mm) diameter disk blades.

Specifications

12” (305mm) disk spacing; 2-1/8” (54mm) round axles; Equipped with Timken dual tapered roller bearings.

Capture-3.png.webp
Standard Equipment

  • 28” (711mm) diameter, 3/8” (10mm) thick, cutout (notched) deep concavity disk blades.

  • Adjustable disk blade scrapers.

  • Heavy-duty bearing wear plates.

  • New industrial tires – 2 each. TAW-16 thru TAW-24: 12.5L x 15. TAW-28 and TAW-32: 21.5L x 16.1.

  • The hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach the rear of the tractor.

  • Drawbar jack stand and safety chain.

Optional Equipment

  • 30” (762mm) diameter x 3/8” (10mm) thick, cutout (notched) deep concavity disk blades.

  • 30” (762mm) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades.

  • 32” (813mm) diameter x 3/8” (10mm) thick, cutout (notched) deep concavity disk blades.

  • Cylinder rod stops.

TAWSeries1-1.jpg.webp
TAWSeries2.jpg.webp
bottom of page